Photocell with two Schottky barrier contacts Al-p-Siand ohmic silicide contact

Authors

  • Рудиарий Борисович Бурлаков Dostoevsky Omsk State University, Omsk, Russia

DOI:

https://doi.org/10.25206/1813-8225-2020-171-86-91

Keywords:

method of fabricating the photocell, p-type silicon, Schottky barrier contacts Al-p-Si, silicidecontact Ni2Si-p-Si, silicidecontact Pd2Si-p-Si

Abstract

Way of the fabrication and results of studies of photoelectric features of photocell with two Schottky barrier opaque contacts Al-p-Si on one party of the silicon plate and ohmic silicide contact Ni2Si-p-Si (or Pd2Si-p-Si) situated on the opposite party of the plate are сconsidered. It is shown that explored photocell can be used for the transformation of the energy of the radiation in the electrical energy at room temperature in near infrared region of the spectrum (0,8–1,4) micron. This characteristic of the designed photocell will allow to increase its application. Photocell possesses a simple structure and technology with a time of its fabrication in the interval (2,5–3) hour.

Downloads

Download data is not yet available.

Author Biography

Рудиарий Борисович Бурлаков, Dostoevsky Omsk State University, Omsk, Russia

кандидат физико- математических наук, доцент (Россия), доцент кафедры «Прикладная и медицинская физика».

Downloads


Abstract views: 8

Published

2020-06-30

How to Cite

[1]
Бурлаков, Р.Б. 2020. Photocell with two Schottky barrier contacts Al-p-Siand ohmic silicide contact. Omsk Scientific Bulletin. 3(171) (Jun. 2020), 86–91. DOI:https://doi.org/10.25206/1813-8225-2020-171-86-91.

Issue

Section

Instrument Engineering, Metrology and Information-Measuring Devices and Systems

Similar Articles

You may also start an advanced similarity search for this article.