Geometric shape parameterization of multidimensional finite non-regular point sets

Authors

DOI:

https://doi.org/10.25206/1813-8225-2025-195-13-18

Keywords:

geometric shape, parameterization, simplex, complex, simplicial approximation, similarity, geometric morphometry.

Abstract

The paper is devoted to a formal approach to parameterization the geometric shape of spatial point irregular sets in multidimensional Euclidean space. The geometric shape of the point set is described by means of the set of numerical parameters that determine the relative position of all points of the set up to similarity. Numeric shape parameters are defined as ratios of distances between given points and vertices of some basis simplex. The basis simplex is selected at the given set of points. It is shown that geometric shape of the set or the set of numerical parameters does not depend on the choice of the basis simplex. Change of the basis means recalculation of shape parameters values by linear transformation formulas. A multidimensional object, the geometric shape of which is supposed to be described by numerical parameters, is previously subjected to simplicial approximation. Such an approximation is considered as a simplicial complex having a combinatorial structure. The paper also shows that all values of the shape parameters have to be satisfy some conditions that generate some area in the multidimensional space of parameters. To illustrate the described approach several examples are given. The proposed approach can be applied to solving a number of theoretical and applied problems of engineering geometry in the field of multidimensional geometric morphometry.

Downloads

Download data is not yet available.

Author Biographies

Yurkov Viktor Yuryevich, Omsk State Technical University

Doctor of Technical Sciences, Professor, Professor of the Design and Technology of Light Industry Product Manufacture Department, Omsk State Technical University (OmSTU), Omsk.

Chizhik Margarita Anatolyevna, Omsk State Technical University

Doctor of Technical Sciences, Professor, Professor of the Design and Technology of Light Industry Product Manufacture Department, OmSTU, Omsk.

References

(1). Кондусов Д. В., Кондусова В. Б. Сравнительный анализ методов поиска 3D-моделей изделий машиностроения по их геометрической форме // Вестник машиностроения. 2024. Т. 103, № 10. С. 873–876. DOI: 10.36652/0042-4633-2024-103-10-873-876. EDN: FTJILC.

Kondusov D. V., Kondusova V. B. Sravnitel’nyy analiz metodov poiska 3D-modeley izdeliy mashinostroyeniya po ikh geometricheskoy forme [Comparative analysis of methods for searching of 3D models of mechanical engineering products by their geometric shape]. Vestnik Mashinostroyeniya. 2024. Vol. 103, no. 10. P. 873–876. DOI: 10.36652/0042-4633-2024-103-10-873-876. EDN: FTJILC. (In Russ.).

(2). Виноградова Г. Л., Зажарова Е. А. Автоматизация инженерного анализа изделий сложной геометрической формы в T-FLEXCAD // Вестник Костромского государственного технологического университета. 2011. № 1 (26). С. 66–71. EDN: OGIRQN.

Vinogradova G. L., Zazharova E. A. Avtomatizatsiya inzhenernogo analiza izdeliy slozhnoy geometricheskoy formy v T-FLEXCAD [Automatization of engineering analysis of complex geometric shape of products in T-FLEX CAD]. Vestnik Kostromskogo Gosudarstvennogo Tekhnologicheskogo Universiteta. 2011. No. 1 (26). P. 66–71. EDN: OGIRQN. (In Russ.).

(3). Бырдина М. В., Мицик М. Ф., Белышева В. С. Расчет и оптимизация геометрических параметров изделий легкой промышленности конической формы // Известия высших учебных заведений. Технология легкой промышленности. 2022. Т. 56, № 2. С. 52–56. DOI: 10.46418/0021-3489-2022-56-02-10. EDN: CDWGTK.

Byrdina M. V., Mitsik M. F., Belysheva V. S. Raschet i optimizatsiya geometricheskikh parametrov izdeliy legkoy promyshlennosti konicheskoy formy [Calculation and optimization of geometric parameters of light industry products of conical shape]. Izvestiya vysshikh uchebnykh zavedeniy. Tekhnologiya legkoy promyshlennosti. The News of Higher Educational Institutions. Technology of Light Industry. 2022. Vol. 56, no. 2. P. 52–56. DOI: 10.46418/0021-3489-2022-56-02-10. EDN: CDWGTK. (In Russ.).

(4). Казакова Н. А., Иванова О. В., Хамматова В. В. Геометрическая классификация сложных пространственных форм в одежде и интерьерном текстиле // Вестник Технологического университета. 2017. Т. 20, № 3. С. 91–94. EDN: XXQHSH.

Kazakova N. A., Ivanova O. V., Khammatova V. V. Geometricheskaya klassifikatsiya slozhnykh prostranstvennykh form v odezhde i inter’yernom tekstile [Geometric classification of complex spatial shapes in clothing and interior textiles]. Vestnik Tekhnologicheskogo universiteta. Herald of Technological University. 2017. Vol. 20, no. 3. P. 91–94. EDN: XXQHSH. (In Russ.).

(5). Васильев А. Г., Васильева И. А. Геометрическая морфометрия в популяционной экологии: новые возможности и научные перспективы // Принципы экологии. 2016. № 3 (19). С. 34. EDN: WOIRUN.

Vasilyev A. G., Vasilyeva I. A. Geometricheskaya morfometriya v populyatsionnoy ekologii: novyye vozmozhnosti i nauchnyye perspektivy [Geometric morphometrics in populative ecology: New possibilities and scientific perspectives]. Printsipy ekologii. Principles of the Ecology. 2016. No. 3 (19). P. 34. EDN: WOIRUN. (In Russ.).

(6). Мандрица С. А. К использованию геометрической морфометрии в ихтиологии // Вестник Пермского университета. 2007. № 5 (10). С. 38–52. EDN: PAVBYD.

Mandritsa S. A. K ispol’zovaniyu geometricheskoy morfometrii v ikhtiologii [On the use of geometric morphometrics in ichthyology]. Vestnik Permskogo universiteta. Bulletin of Perm University. 2007. No. 5 (10). P. 38–52. EDN: PAVBYD. (In Russ.).

(7). Чижов М. И., Успехов А. А., Троценко А. С. Метод точной оценки близости геометрических форм полигональных моделей // Вестник Воронежского государственного университета. Серия: Системный анализ и информационные технологии. 2018. № 2. С. 118–122. EDN: XWPOAH.

Chizhov M. I., Uspekhov A. A., Trotsenko A. S. Metod tochnoy otsenki blizosti geometricheskikh form poligonal’nykh modeley [The precise method of the geometric forms similarity estimation for the polygonal models]. Vestnik Voronezhskogo gosudarstvennogo universiteta. Seriya: Sistemnyy analiz i informatsionnyye tekhnologii. Proceedings of Voronezh State University. Series: Systems Analysis and Information Technologies. 2018. No. 2. P. 118–122. EDN: XWPOAH. (In Russ.).

(8). Тарасова А. С. Методы определения оптимальной геометрической формы кластеров в задачах кластерного анализа // Информационные технологии. 2008. № 2. С. 10–15. EDN: KFQGHZ.

Tarasova A. S. Metody opredeleniya optimal’noy geometricheskoy formy klasterov v zadachakh klasternogo analiza [Detecting optimal geometrical cluster forms in clusterization problems]. Informatsionnyye tekhnologii. Information Technologies. 2008. No. 2. P. 10–15. EDN: KFQGHZ. (In Russ.).

(9). Лаптева Е. Н. Методика получения и анализа пространственной формы объекта на основе трехмерных координат точек его поверхности. Москва, 2004. Деп. в ВИНИТИ РАН 05.04.2004, № 556-В2004.

Lapteva E. N. Metodika polucheniya I analiza prostranstvennoy formy ob’’ekta na osnove trekhmernykh koordinat tochek ego poverkhnosti [Method for obtaining and analyzing the spatial shape of an object based on the three-dimensional coordinates of its surface points]. Moscow, 2004. Deposited in VINITI RAS. 05.04.2004. No. 556-В2004. (In Russ.).

(10). Косников Ю. Н. Целочисленная параметризация геометрических форм на координатной плоскости // Международный научно-исследовательский журнал. 2023. № 12 (138). С. 1–9. DOI: 10.23670/IRJ.2023.138.15 EDN: JHSQRE.

Kosnikov Yu. N. Tselochislennaya parametrizatsiya geometricheskikh form na koordinatnoy ploskosti [Integer parameterization of geometric shapes on the coordinate plane]. Mezhdunarodnyy nauchno-issledovatel’skiy zhurnal. International Research Journal. 2023. No. 12 (138). P. 1–9. DOI: 10.23670/IRJ.2023.138.15. EDN: JHSQRE. (In Russ.).

Published

2025-09-22

How to Cite

[1]
Yurkov В.Ю. and Chizhik М.А. 2025. Geometric shape parameterization of multidimensional finite non-regular point sets. Omsk Scientific Bulletin. 3(195) (Sep. 2025), 13–18. DOI:https://doi.org/10.25206/1813-8225-2025-195-13-18.

Issue

Section

Mechanical Engineering