No. 6(168) (2019)

Mechanical Engineering and Engineering Science

Reduction of economic efficiency of marine diesel from pollution of elements and turbocharger cavity when using fuels of different composition

Виктор Родионович Ведрученко, Алексей Викторович Штиб, Иван Игоревич Малахов

5-9
- PDF (Русский)
The influence of sharpness of cutting tool on processing of steel 07X16H4B

Денис Сергеевич Реченко, Ренат Уахитович Каменов, Дарья Георгиевна Балова, Азиза Кайржановна Аубакирова, Иван Константинович Черных

10-14
- PDF (Русский)
Study of stress-strain state of wheelset of freight car during braking

Андрей Александрович Крутько, Дарья Александровна Седых, Александр Алфеевич Воробьев, Александра Рустамовна Путинцева, Юрий Олегович Филиппов

15-19
- PDF (Русский)

Electrical Engineering

Application of maximum principle optimizing active current subharmonic filter

Владимир Николаевич Аносов, Диана Николаевна Белкова, Владимир Михайлович Кавешников

20-26
- PDF (Русский)
Modeling flux linkages of an induction motor in dynamic modes. Comparison of the effectiveness of various control algorithms

Владимир Львович Кодкин, Александр Сергеевич Аникин, Александр Александрович Балденков, Чжи Чен Хуан

27-33
- PDF (Русский)
The study of five-level inverters with various PWM

Олег Александрович Лысенко, Александр Анатольевич Охотников, Владимир Андреевич Захаренко, Вадим Юрьевич Кобенко

34-39
- PDF (Русский)
Method of formation of numerical projection-grid algorithm on basis of «three-dimensional regular element» for calculation of 3D-models of magnetic field in cylindrical coordinate system for synchronous magnetoelectric machines as part of high-tech electr

Андрей Александрович Татевосян, Елена Григорьевна Андреева

40-45
- PDF (Русский)
Development of general approach to optimal design of hightech energy-efficient electrical systems based on low-speed synchronous magnetoelectric machines

Андрей Александрович Татевосян, Алексей Владимирович Бубнов

46-51
- PDF (Русский)
Elimination of voltage and frequency deviations, suppression of chaotic oscillations in power system with distributed generation

Борис Андреевич Косарев, Владимир Кузьмич Федоров

52-57
- PDF (Русский)
The possibility of occurrence of chaotic modes of operation of electrical system with distributed generation

Галина Андреевна Кощук, Борис Андреевич Косарев, Владимир Кузьмич Федоров, Александр Анатольевич Охотников

58-62
- PDF (Русский)
Improved machine classification algorithm for electric rail circuits in train warning systems

Илона Вадимовна Присухина, Дмитрий Владимирович Борисенко

63-69
- PDF (Русский)
Research of temperature destruction effect on cables insulation operation life

Вадим Николаевич Пугач, Дмитрий Андреевич Поляков, Константин Иванович Никитин, Надежда Андреевна Терещенко, Илья Владимирович Комаров

70-74
- PDF (Русский)

Instrument Engineering, Metrology and Information-Measuring Devices and Systems

Experimental study of erosive possibility of ultrasound exposure in rehabilitation of nephrostomy catheters

Алексей Алексеевич Новиков, Александра Рустамовна Путинцева, Дарья Александровна Седых, Виталий Юрьевич Путинцев, Дарья Дмитриевна Сидоренко

75-79
- PDF (Русский)
Vacuum vaporizer for fabrication of thin films of material by sublimations

Александр Иосифович Блесман, Рудиарий Борисович Бурлаков

80-82
- PDF (Русский)
Formation on quartz substrate and study of properties of nanostructured layers from polyvinylen obtained by dehydrochlorination of polyvinyl chloride with modifying additive — iron nitrate

Юрий Гавриилович Кривозубов, Олег Валентинович Кряжев, Ирина Валерьяновна Аникеева, Надим Анварович Давлеткильдеев, Денис Витальевич Соколов, Ольга Николаевна Семенова

83-88
- PDF (Русский)
On construction of jet-drop optical measuring systems: analysis of optical, dynamic and metrological parameters in visualization of surface of product

Евгений Владимирович Леун, Лариса Григорьевна Варепо, Александр Евгеньевич Шаханов, Андрей Викторович Никель

89-95
- PDF (Русский)

НОМЕР ВЫПУСКА	ПЛАНОВЫЙ ПРИЕМ СТАТЕЙ*	МЕСЯЦ ИЗДАНИЯ
ПЕРВОЕ ПОЛУГОДИЕ
1	до 15 января	февраль
2	до 15 апреля	июнь
ВТОРОЕ ПОЛУГОДИЕ
3	до 17 июня	сентябрь
4	до 20 сентября	ноябрь

Mechanical Engineering and Engineering Science

Reduction of economic efficiency of marine diesel from pollution of elements and turbocharger cavity when using fuels of different composition

The influence of sharpness of cutting tool on processing of steel 07X16H4B

Study of stress-strain state of wheelset of freight car during braking

Electrical Engineering

Application of maximum principle optimizing active current subharmonic filter

Modeling flux linkages of an induction motor in dynamic modes. Comparison of the effectiveness of various control algorithms

The study of five-level inverters with various PWM

Method of formation of numerical projection-grid algorithm on basis of «three-dimensional regular element» for calculation of 3D-models of magnetic field in cylindrical coordinate system for synchronous magnetoelectric machines as part of high-tech electr

Development of general approach to optimal design of hightech energy-efficient electrical systems based on low-speed synchronous magnetoelectric machines

Elimination of voltage and frequency deviations, suppression of chaotic oscillations in power system with distributed generation

The possibility of occurrence of chaotic modes of operation of electrical system with distributed generation

Improved machine classification algorithm for electric rail circuits in train warning systems

Research of temperature destruction effect on cables insulation operation life

Instrument Engineering, Metrology and Information-Measuring Devices and Systems

Experimental study of erosive possibility of ultrasound exposure in rehabilitation of nephrostomy catheters

Vacuum vaporizer for fabrication of thin films of material by sublimations

Formation on quartz substrate and study of properties of nanostructured layers from polyvinylen obtained by dehydrochlorination of polyvinyl chloride with modifying additive — iron nitrate

On construction of jet-drop optical measuring systems: analysis of optical, dynamic and metrological parameters in visualization of surface of product

Language

ISSN

Make a Submission

VAK

Indexed in

Плановый выход журналов на 2025 год

Information