No. 4(188) (2023)

Mechanical Engineering

The surface of non-linear rotation

Panchuk Konstantin Leonidovich, Myasoyedova Tatyana Mikhaylovna

5-12
- PDF (Русский)
Automation of ship hull surface simulation

Popov Evgeniy Vladimirovich, Shorkina Irina Nikolayevna

13-21
- PDF (Русский)
Geometric modeling of the process of digging trench pits during pipeline repair

Pritykin Fedor Nikolayevich, Kuznetsov Ilya Sergeyevich

22-28
- PDF (Русский)
The problem of reduction of geometry and graphic training departments in Russian universities

Rotkov Sergey Igorevich, Konopatskiy Evgeniy Viktorovich, Panchuk Konstantin Leonidovich

29-37
- PDF (Русский)
Synthesis of an adaptive cylindrical gear with arched teeth with two contact zones spaced along the length of the tooth

Syzrantsev Vladimir Nikolaevich, Starikov Aleksander Ivanovich

38-45
- PDF (Русский)
Selection of dust cleaning equipment such as cyclone for metalworking industries using the Hierarchy Analysis Method

Solomin Vyacheslav Yuryevich, Belkova Sofia Valentinovna, Solomin Vitaliy Yuryevich

46-52
- PDF (Русский)
Increasing the economic efficiency of the work of Gazprom Transgaz Kazan LLC when operating gas heaters at gas distribution stations using a power supply unit

Shalnev Maksim Olegovich, Denisova Yana Vladimirovna, Battalov Andrey Faimovich

53-59
- PDF (Русский)

Energy and Electrical Engineering

Construction of the control algorithm to improve energy efficiency of a switched reluctance electric motor

Kashuba Aleksandr Viktorovich, Shevkunova Anastasiya Vladimirovna

60-69
- PDF (Русский)
Highly reliable switched reluctance motor for the traction electric drive system of railway rolling stock

Miroshnichenko Ekaterina Evgenievna

70-76
- PDF (Русский)
The study of the dependence of magnetic field gradient on parameters of the part being tested by the pulsed magnetic non-destructive testing method

Tarasenko Oleg Vladimirovich, Kreselyuk Yuriy Vladimirovich, Ivlev Mikhail Nikolayevich

77-83
- PDF (Русский)
The analysis of continuous admissible currents and active power losses in overhead power lines taking into account climatic factors

Petrova Elena Vladimirovna, Girshin Stanislav Sergeyevich, Krivolapov Vladislav Aleksandrovich, Goryunov Vladimir Nikolayevich, Trotsenko Vladislav Mikhaylovich

84-92
- PDF (Русский)
Temperature analysis and comparison of active power losses in non-stationary and stationary thermal conditions of overhead power lines

Trotsenko Vladislav Mikhaylovich

93-99
- PDF (Русский)
Development of selective line detection method with single-phase earth fault for industrial 6–35 kV networks with isolated neutral with non-sinusoidal load

Paramzin Alexander Olegovich

100-108
- PDF (Русский)
Development of a method for determining the structure of mini-grid, taking into account optimal routes of power lines in an area with sharply heterogeneous landscape

Tkachenko Vsevolod Andreevich

109-116
- PDF (Русский)

Electronics, Photonics, Instrument Engineering and Connection

Registration and signal processing in measuring system for monitoring leaks of NPP pipeline fittings

Abidova Elena Aleksandrovna, Ratushny Viktor Ivanovich

117-124
- PDF (Русский)
The influence of preliminary heat treatment on morphology of carbon layer formed on surface of chlorinated polyvinyl chloride under the impact of a high-power ion beam

Kovivchak Vladimir Stepanovich, Parygin Arkadiy Alekseyevich

125-131
- PDF (Русский)
Temperature compensated crystal oscillator design in Keysight ADS

Lyashuk Aleksey Nikolayevich, Kosykh Anatoliy Vladimirovich

132-139
- PDF (Русский)
Full-Bridge power resonant converter for the arcjet thruster of a small spacecraft

Fedyanin Viktor Viktorovich, Shalay Viktor Vladimirovich, Fedorov Vladimir Kuzmich, Yachmenev Pavel Sergeevich, Vavilov Igor Sergeevich

140-151
- PDF (Русский)
Automated synthesis of integrated microwave LC-filters layouts with passband losses minimization

Erokhin Viktor Valerievich, Zavyalov Sergey Anatolievich

152-161
- PDF (Русский)
Results of a study on combustion of solids in an enclosed volume

Makarova Tatiana Petrovna, Baturo Aleksey Nikolaevich, Bezborodov Yury Nikolaevich

162-168
- PDF (Русский)

НОМЕР ВЫПУСКА	ПЛАНОВЫЙ ПРИЕМ СТАТЕЙ*	МЕСЯЦ ИЗДАНИЯ
ПЕРВОЕ ПОЛУГОДИЕ
1	до 15 января	февраль
2	до 15 апреля	июнь
ВТОРОЕ ПОЛУГОДИЕ
3	до 17 июня	сентябрь
4	до 20 сентября	ноябрь

Full Issue

Mechanical Engineering

The surface of non-linear rotation

Automation of ship hull surface simulation

Geometric modeling of the process of digging trench pits during pipeline repair

The problem of reduction of geometry and graphic training departments in Russian universities

Synthesis of an adaptive cylindrical gear with arched teeth with two contact zones spaced along the length of the tooth

Selection of dust cleaning equipment such as cyclone for metalworking industries using the Hierarchy Analysis Method

Increasing the economic efficiency of the work of Gazprom Transgaz Kazan LLC when operating gas heaters at gas distribution stations using a power supply unit

Energy and Electrical Engineering

Construction of the control algorithm to improve energy efficiency of a switched reluctance electric motor

Highly reliable switched reluctance motor for the traction electric drive system of railway rolling stock

The study of the dependence of magnetic field gradient on parameters of the part being tested by the pulsed magnetic non-destructive testing method

The analysis of continuous admissible currents and active power losses in overhead power lines taking into account climatic factors

Temperature analysis and comparison of active power losses in non-stationary and stationary thermal conditions of overhead power lines

Development of selective line detection method with single-phase earth fault for industrial 6–35 kV networks with isolated neutral with non-sinusoidal load

Development of a method for determining the structure of mini-grid, taking into account optimal routes of power lines in an area with sharply heterogeneous landscape

Electronics, Photonics, Instrument Engineering and Connection

Registration and signal processing in measuring system for monitoring leaks of NPP pipeline fittings

The influence of preliminary heat treatment on morphology of carbon layer formed on surface of chlorinated polyvinyl chloride under the impact of a high-power ion beam

Temperature compensated crystal oscillator design in Keysight ADS

Full-Bridge power resonant converter for the arcjet thruster of a small spacecraft

Automated synthesis of integrated microwave LC-filters layouts with passband losses minimization

Results of a study on combustion of solids in an enclosed volume

Language

ISSN

Make a Submission

VAK

Indexed in

Плановый выход журналов на 2025 год

Information