Pulsed technology for manual arc welding of thin-walled structures by coated electrode
DOI:
https://doi.org/10.25206/1813-8225-2019-164-5-10Keywords:
welding by coated electrode, thyristor singlephase rectifier, pulsating current, electrode metal transfer, oscillogramsAbstract
The article presents the results of work on the study of the use of a single-phase rectifier with an additional unit for obtaining pulsed modes for manual arc welding with thin-walled construction by a stick electrode. The proposed scheme of an additional block allows by selecting the parameters of the welding mode to ensure a stable quasistationary process of melting and transfer of the electrode metal. Thus, it becomes possible to weld thin-sheet structures without reducing the diameter of the coated electrode.
Downloads
Download data is not yet available.
Published
2019-04-30
How to Cite
[1]
Мухи, В.Ф., Еремин, Е.Н. and Филиппов, Ю.О. 2019. Pulsed technology for manual arc welding of thin-walled structures by coated electrode. Omsk Scientific Bulletin. 2(164) (Apr. 2019), 5–10. DOI:https://doi.org/10.25206/1813-8225-2019-164-5-10.
Issue
Section
Mechanical Engineering and Engineering Science
License
Non-exclusive rights to the article are transferred to the journal in full accordance with the Creative Commons License BY-NC-SA 4.0 «Attribution-NonCommercial-ShareAlike 4.0 Worldwide License (CC BY-NC-SA 4.0»)
