Biaxial testing of metal samples on testing machines with one load axis

Authors

  • Константин Александрович Вансович Omsk State Technical University, Omsk, Russia
  • Виктор Иванович Ядров Omsk State Technical University, Omsk, Russia

DOI:

https://doi.org/10.25206/1813-8225-2020-173-10-16

Keywords:

fatigue tests, cruciform specimen, surface crack, biaxial loading, biaxial loading coefficient, testing machine

Abstract

The necessity of experimental studies to assess the growth rate of fatigue cracks under biaxial loading is substantiated. An overview of testing machines for biaxial testing of metal samples, devices and fixtures used to ensure biaxial loading is made. An original device for distributing the vertical force of the testing machine along two axes of a cruciform sample is described.

Downloads

Download data is not yet available.

Author Biographies

Константин Александрович Вансович, Omsk State Technical University, Omsk, Russia

кандидат технических наук, доцент (Россия), доцент кафедры машиностроение и машиноведение  «Нефтегазовое дело, стандартизация и метрология».

Виктор Иванович Ядров, Omsk State Technical University, Omsk, Russia

кандидат технических наук, доцент Военного учебного центра.

Downloads


Abstract views: 5

Published

2020-11-30

How to Cite

[1]
Вансович, К.А. and Ядров, В.И. 2020. Biaxial testing of metal samples on testing machines with one load axis. Omsk Scientific Bulletin. 5(173) (Nov. 2020), 10–16. DOI:https://doi.org/10.25206/1813-8225-2020-173-10-16.

Issue

No. 5(173) (2020)

Section

Mechanical Engineering and Engineering Science

License

Non-exclusive rights to the article are transferred to the journal in full accordance with the Creative Commons License BY-NC-SA 4.0 «Attribution-NonCommercial-ShareAlike 4.0 Worldwide License (CC BY-NC-SA 4.0»)

by-nc-sa

Similar Articles

You may also start an advanced similarity search for this article.