Control and diagnostics of faults in hardware-software complex

Authors

  • Денис Анатольевич Панков Omsk State Technical University, Omsk, Russia
  • Людмила Альбертовна Денисова Omsk State Technical University, Omsk, Russia

DOI:

https://doi.org/10.25206/1813-8225-2018-158-128-133

Keywords:

control and diagnostics, fault simulation, test automation, hardware and software complex, hardware failure

Abstract

The paper proposes a set of parameters for control general faults in microcontroller systems. Questions of test simulation of malfunctions describe automation testing of products at the stage of development. Program and algorithmic modules of control and diagnostics is used for the approach to fault detection of hardwaresoftware complex. The effectiveness of diagnosing failures and failures in hardware components is confirmed with monitoring and in simulation of malfunctions experimentally.

Downloads

Download data is not yet available.

Author Biographies

Денис Анатольевич Панков, Omsk State Technical University, Omsk, Russia

аспирант кафедры «Автоматизированные системы обработки информации и управления».

Людмила Альбертовна Денисова, Omsk State Technical University, Omsk, Russia

доктор технических наук, доцент (Россия), профессор кафедры «Автоматизированные системы обработки информации и управления».

Downloads


Abstract views: 14

Published

2018-04-28

How to Cite

[1]
Панков, Д.А. and Денисова, Л.А. 2018. Control and diagnostics of faults in hardware-software complex. Omsk Scientific Bulletin. 2(158) (Apr. 2018), 128–133. DOI:https://doi.org/10.25206/1813-8225-2018-158-128-133.

Issue

No. 2(158) (2018)

Section

Information technology

License

Non-exclusive rights to the article are transferred to the journal in full accordance with the Creative Commons License BY-NC-SA 4.0 «Attribution-NonCommercial-ShareAlike 4.0 Worldwide License (CC BY-NC-SA 4.0»)

by-nc-sa

Similar Articles

You may also start an advanced similarity search for this article.