Application of electrohydraulic effect for stripping from terminals of plastic parts

Authors

  • Валерий Федорович Ковалевский Omsk State Technical University, Omsk, Russia
  • Станислав Борисович Скобелев Omsk State Technical University, Omsk, Russia
  • Григорий Геннадьевич Бурый Siberian State Automobile and Highway University, Omsk, Russia

DOI:

https://doi.org/10.25206/1813-8225-2018-160-123-126

Keywords:

conclusions of plastic parts, electrohydraulic effect, breakdown, cleaning device, spark discharge, hardening

Abstract

The paper reviews the methods for cleaning plastic parts. The physics of the electrohydraulic effect processor L. A. Yutkin
is considered. The design of the pilot plant, as well as the interchangeable devices used to remove the flare from the terminals
of the plastic parts, is presented. The results of experimental studies of the application of the electrohydraulic effect for the
removal of a cover are presented. During the processing, the thick layer of stripping is completely removed from the leads in 1–2 minutes. On the conclusions of the details there are small areas covered with a layer of a few micrometers thick.

Downloads

Download data is not yet available.

Author Biographies

Валерий Федорович Ковалевский, Omsk State Technical University, Omsk, Russia

кандидат технических наук, доцент (Россия), доцент кафедры «Технология машиностроения» Омского государственного технического университета (ОмГТУ).

Станислав Борисович Скобелев, Omsk State Technical University, Omsk, Russia

кандидат технических наук, доцент кафедры «Технология машиностроения» ОмГТУ.

Григорий Геннадьевич Бурый, Siberian State Automobile and Highway University, Omsk, Russia

кандидат технических наук, доцент кафедры «Автомобили, конструкционные материалы и технологии» Сибирского государственного автомобильно-дорожного университета, г. Омск.

Downloads


Abstract views: 16

Published

2018-09-20

How to Cite

[1]
Ковалевский, В.Ф., Скобелев, С.Б. and Бурый, Г.Г. 2018. Application of electrohydraulic effect for stripping from terminals of plastic parts. Omsk Scientific Bulletin. 4(160) (Sep. 2018), 123–126. DOI:https://doi.org/10.25206/1813-8225-2018-160-123-126.

Issue

No. 4(160) (2018)

Section

Instrument Engineering, Metrology and Information-Measuring Devices and Systems

License

Non-exclusive rights to the article are transferred to the journal in full accordance with the Creative Commons License BY-NC-SA 4.0 «Attribution-NonCommercial-ShareAlike 4.0 Worldwide License (CC BY-NC-SA 4.0»)

by-nc-sa