No. 1(189) (2024)

Mechanical Engineering

Defining quantitative parameters and coordinates of the defect signal by acoustic-emission control of cylindrical tanks

Kuznetsov Andrey Albertovich, Kulakovskaya Vera Palladiyevna

5-11
- PDF (Русский)
Development of the algorithm for classifying industries according to the type of intra-factory cooperation of main and auxiliary processes using machine learning

Malysheva Tatyana Vitalievna

12-19
- PDF (Русский)
Elastoplastic modeling of fatigue cracks

Vansovich Konstantin Aleksandrovich, Yadrov Viktor Ivanovich

20-27
- PDF (Русский)
Quality management of production processes of engineering products in the network

Denisova Yana Vladimirovna

28-34
- PDF (Русский)
The analysis of the effect of heat treatment in various atmospheres on the structure of titanium foil

Knyazev Egor Vladimirovich, Badamshin Artem Maratovich, Stenkin Yuriy Alekseyevich, Rogachev Evgeniy Anatolyevich

35-40
- PDF (Русский)
Transformation of operational management of machine tools, machine complexes operation with the help of «Operational Management System»

Korzhova Olga Pavlovna, Makashin Dmitry Sergeevich, Popov Peter Evgenyevich, Donoaga Ilya Evgenyevich, Obryvalin Alexey Viktorovich

41-47
- PDF (Русский)
Complex temperature distribution model for controlling the thermal performance of household led lamps

Kuzmenko Vladimir Pavlovich

48-55
- PDF (Русский)
Evaluation of the influence of laser quenching mode parameters on the quality of the surface and surface layer of machine parts (overview)

Petrochenko Sergei Valeryevich, Hao Qingle, Xinshan Yu, Zhao Kaipeng

56-65
- PDF (Русский)
The study of the dynamic displacement of the table of a jig boring machine under load

Blokhin Dmitriy Andreyevich, Mikhailov Igor Sergeyevich

66-72
- PDF (Русский)

Energy and Electrical Engineering

Features of using low-pass filter for small signal demodulation in phase-locking motor drive

Bubnov Aleksey Vladimirovich, Daynovich Aleksandr Mikhaylovich

73-78
- PDF (Русский)
Mathematical model of a three-phase-multiphase transformer phases converter with a series connection of coils of each phase of secondary winding

Moskalev Yury Vladimirovich

79-85
- PDF (Русский)
Quality assurance multi-component environments moved belt conveyors energy saving pulsed magnetic extraction

Parsentev Oleg Sergeevich, Musaev Timur Abdulayevich

86-92
- PDF (Русский)
Algorithms for estimating the main reliability parameters of low-voltage equipment of shop-floor network schemes

Petrova Renata Maratovna, Gracheva Elena Ivanovna

93-102
- PDF (Русский)
Diagnostic device of single-element insulators of overhead transmission line by temperature

Tereshchenko Nadezhda Andreyevna

103-109
- PDF (Русский)

Electronics, Photonics, Instrument Engineering and Connection

The concept of creating an electric field strength meter with the determination of the error of the measurement result and the distance to the field source

Biryukov Sergey Vladimirovich

110-118
- PDF (Русский)
Increasing the contrast and accuracy of localization of objects of interest on orthophotomaps of the terrain built from distorted images from an unmanned aerial vehicle

Zakhlebin Aleksandr Sergeyevich, Kuryachiy Mikhail Ivanovich, Kapustin Vyacheslav Valeryevich, Kamenskiy Andrey Viktorovich, Movchan Andrey Kirillovich

119-126
- PDF (Русский)
Digital anti-aliasing trapezoidal recursively separable image processing filter with resizable scanning multi-element aperture

Kamenskiy Andrey Viktorovich, Rylov Kirill Aleksandrovich, Borodina Natalya

127-136
- PDF (Русский)

НОМЕР ВЫПУСКА	ПЛАНОВЫЙ ПРИЕМ СТАТЕЙ*	МЕСЯЦ ИЗДАНИЯ
ПЕРВОЕ ПОЛУГОДИЕ
1	до 15 января	февраль
2	до 15 апреля	июнь
ВТОРОЕ ПОЛУГОДИЕ
3	до 17 июня	сентябрь
4	до 20 сентября	ноябрь

Full Issue

Mechanical Engineering

Defining quantitative parameters and coordinates of the defect signal by acoustic-emission control of cylindrical tanks

Development of the algorithm for classifying industries according to the type of intra-factory cooperation of main and auxiliary processes using machine learning

Elastoplastic modeling of fatigue cracks

Quality management of production processes of engineering products in the network

The analysis of the effect of heat treatment in various atmospheres on the structure of titanium foil

Transformation of operational management of machine tools, machine complexes operation with the help of «Operational Management System»

Complex temperature distribution model for controlling the thermal performance of household led lamps

Evaluation of the influence of laser quenching mode parameters on the quality of the surface and surface layer of machine parts (overview)

The study of the dynamic displacement of the table of a jig boring machine under load

Energy and Electrical Engineering

Features of using low-pass filter for small signal demodulation in phase-locking motor drive

Mathematical model of a three-phase-multiphase transformer phases converter with a series connection of coils of each phase of secondary winding

Quality assurance multi-component environments moved belt conveyors energy saving pulsed magnetic extraction

Algorithms for estimating the main reliability parameters of low-voltage equipment of shop-floor network schemes

Diagnostic device of single-element insulators of overhead transmission line by temperature

Electronics, Photonics, Instrument Engineering and Connection

The concept of creating an electric field strength meter with the determination of the error of the measurement result and the distance to the field source

Increasing the contrast and accuracy of localization of objects of interest on orthophotomaps of the terrain built from distorted images from an unmanned aerial vehicle

Digital anti-aliasing trapezoidal recursively separable image processing filter with resizable scanning multi-element aperture

Language

ISSN

Make a Submission

VAK

Indexed in

Плановый выход журналов на 2025 год

Information