Research of vibrations of vertical component of cutting force during turning

Authors

DOI:

https://doi.org/10.25206/1813-8225-2021-180-5-10

Keywords:

vibration, metal cutting, turning, Fourier transform, cutting force

Abstract

A method for localizing bands of vertical component of the cutting force in time spectrum during metal turning has been established. The method for determining the source of spectral components is based on the windowed Fourier transform. The powers of the spectral components of vibration signals at different cutting speeds in especially sensitive frequency ranges are compared.

Downloads

Download data is not yet available.

Author Biographies

Евгений Владимирович Артамонов, Tyumen Industrial University, Tyumen, Russia

доктор технических наук, профессор (Россия), заведующий кафедрой «Станки и инструменты».

Владислав Вадимович Воронин, Tyumen Industrial University, Tyumen, Russia

аспирант кафедры «Станки и инструменты».

Татьяна Евгеньевна Помигалова, Tyumen Industrial University, Tyumen, Russia

кандидат технических наук, доцент (Россия), доцент кафедры «Прикладная механика».

Downloads


Abstract views: 36

Published

2021-12-24

How to Cite

[1]
Артамонов, Е.В., Воронин, В.В. and Помигалова, Т.Е. 2021. Research of vibrations of vertical component of cutting force during turning. Omsk Scientific Bulletin. 6(180) (Dec. 2021), 5–10. DOI:https://doi.org/10.25206/1813-8225-2021-180-5-10.

Issue

No. 6(180) (2021)

Section

Mechanical Engineering and Engineering Science

License

Non-exclusive rights to the article are transferred to the journal in full accordance with the Creative Commons License BY-NC-SA 4.0 «Attribution-NonCommercial-ShareAlike 4.0 Worldwide License (CC BY-NC-SA 4.0»)

by-nc-sa

Similar Articles

You may also start an advanced similarity search for this article.