Application of identification method for control of bearing wear

Authors

  • Вадим Юрьевич Кобенко Omsk State Technical University, Omsk, Russia
  • Святослав Олегович Фролов Omsk State Technical University, Omsk, Russia
  • Рафаил Фаридович Ганеев Omsk State Technical University, Omsk, Russia

DOI:

https://doi.org/10.25206/1813-8225-2022-183-98-102

Keywords:

vibration signal, defect, bearing wear, identification measurements, state control

Abstract

The work is devoted to the problem of bearings wear control of during their operation. Well-known methods for control the state of bearings to solve this problem are described. The use of the technology of identification measurement of signals to control the degree of wear of bearings is considered.

Downloads

Download data is not yet available.

Author Biographies

Вадим Юрьевич Кобенко, Omsk State Technical University, Omsk, Russia

доктор технических наук, доцент (Россия), профессор кафедры «Электроника» Омского государственного технического университета (ОмГТУ), г. Омск.

Святослав Олегович Фролов, Omsk State Technical University, Omsk, Russia

аспирант кафедры «Электроника» ОмГТУ, г. Омск.

Рафаил Фаридович Ганеев, Omsk State Technical University, Omsk, Russia

магистрант гр. ЭНм- 211 факультета элитного образования и магистратуры ОмГТУ, г. Омск.

Downloads


Abstract views: 26

Published

2022-06-30

How to Cite

[1]
Кобенко, В.Ю., Фролов, С.О. and Ганеев, Р.Ф. 2022. Application of identification method for control of bearing wear. Omsk Scientific Bulletin. 3(183) (Jun. 2022), 98–102. DOI:https://doi.org/10.25206/1813-8225-2022-183-98-102.

Issue

No. 3(183) (2022)

Section

Electronics, Photonics, Instrument Engineering and Connection

License

Non-exclusive rights to the article are transferred to the journal in full accordance with the Creative Commons License BY-NC-SA 4.0 «Attribution-NonCommercial-ShareAlike 4.0 Worldwide License (CC BY-NC-SA 4.0»)

by-nc-sa

Similar Articles

You may also start an advanced similarity search for this article.