Assessment of the quality of the research process at the stage of scientific studies

Authors

DOI:

https://doi.org/10.25206/1813-8225-2025-195-27-33

Keywords:

quality, research, process, criteria, reliability, risks, evaluation.

Abstract

The structural model of the scientific research process is investigated on the example of the processes of physical-mathematical and physical modeling of heat and mass transfer when creating an on-board system of gasification of liquid components of rocket fuel in the tanks of spent stages of launch vehicles. Methodical recommendations for assessing the quality of the scientific research process are given, containing a list of quality criteria at the stage of research work, including a certain structure of single indicators. The structure of the complex quality assessment of the research process is proposed, as well as block diagrams of the physical-mathematical and physical modeling process, taking into account the introduced quality criteria, allowing to increase the reliability of the obtained results with the least expenditure of labor, time, financial and material-technical resources.

The presented materials can be used as a basis for a universal approach to assess the quality of the scientific research process in solving a wide range of research problems, for example, heat and mass transfer, dynamics, ballistics, programming of complex algorithms, etc.

Downloads

Download data is not yet available.

Author Biographies

Brazhnikova Kseniya Alekseevna, Omsk State Technical University, Omsk, Russia

Research Associate at the Scientific Research Laboratory “Steam-gas Mixtures in Launch Vehicle Designs”, Omsk State Technical University, Omsk.

Savich Ekaterina Konstantinovna, Samara National Research University

Candidate of Technical Sciences, Associate Professor of the Aircraft Production and Quality Control in Mechanical Engineering Department, Samara National Research University, Samara.

References

(1). ГОСТ Р ИСО 9001-2015. Системы менеджмента качества. Требования. Введ. 2015–11–01. Москва: Стандартинформ, 2020. 49 с.

GOST R ISO 9001-2015. Sistemy menedzhmenta kachestva. Trebovaniya [Quality management systems. Requirements]. Moscow, 2020. 49 p. (In Russ.).

(2). ГОСТ Р ИСО 10006-2019. Менеджмент качества. Руководящие указания по менеджменту качества в проектах. Введ. 2020–10–01. Москва: Стандартинформ, 2019. 32 с.

GOST R ISO 10006-2019. Menedzhment kachestva. Rukovodyashchiye ukazaniya po menedzhmentu kachestva v proyektakh [Quality management. Guidelines for quality management in projects]. Moscow, 2019. 32 p. (In Russ.).

(3). Положение о порядке создания, производства и эксплуатации (применения) ракетных и космических комплексов: РК-11-КТ: утв. и введ. в действие Приказом Роскосмоса от 22 дек. 2011 г. № 232. Доступ из справочно-правовой системы «КонсультантПлюс».

Polozheniye o poryadke sozdaniya, proizvodstva i ekspluatatsii (primeneniya) raketnykh i kosmicheskikh kompleksov RK-11-KT [Regulation on the procedure for the creation, production and operation (use) of rocket and space complexes: RK-11-KT]: approved and enacted by Order of Roscosmos of December 22, 2011. No. 232. Available at ConsultantPlus. (In Russ.).

(4). Культин Н. Б., Сурина А. В. Управление инновационными проектами и процессами: моногр. Санкт-Петербург: Изд-во СПбПУ, 2025. 279 с. DOI: 10.18720/SPBPU/5/tr25-87.

Kultin N. B., Surina A. V. Upravleniye innovatsionnymi proyektami i protsessami [Management of innovative projects and processes]. Saint Petersburg, 2025. 279 p. DOI: 10.18720/SPBPU/5/tr25-87. (In Russ.).

(5). Куркова О. П. Организация и планирование научно-технических исследований и разработок: моногр. Санкт-Петербург: Наукоемкие технологии, 2018. 245 с. ISBN 978-5-6040965-2-9. EDN: YXJEJX.

Kurkova O. P. Organizatsiya i planirovaniye nauchno-tekhnicheskikh issledovaniy i razrabotok [Organisation and planning of scientific and technical research and development]. Saint Petersburg, 2018. 245 p. ISBN 978-5-6040965-2-9. EDN: YXJEJX. (In Russ.).

(6). Жемчугов А. М., Жемчугов М. К. Цикл PDCA Деминга. Современное развитие // Проблемы экономики и менеджмента. 2016. № 2 (54). С. 3–28. EDN: VMDSTV.

Zhemchugov A. M., Zhemchugov M. K. Tsikl PDCA Deminga. Sovremennoye razvitiye [PDCA Cycle Deming. Current development]. Problemy Ekonomiki i Menedzhmenta. 2016. No. 2 (54). P. 3–28. EDN: VMDSTV. (In Russ.).

(7). Trushlyakov V. I., Rozhaeva K. A. Developing a Test Stand to Verify Accuracy of Conducted Research at the Early Design Stages of Active Descent Systems of Spent Launcher Stages. Indian Journal of Science and Technology. 2016. Vol. 9 (36). P. 1–7. DOI: 10.17485/ijst/2016/v9i36/102037.

(8). ГОСТ Р ИСО 9004-2019 Менеджмент качества. Качество организации. Руководство по достижению устойчивого успеха организации. Введ. 2020–10–01. Москва: Стандартинформ, 2019. 56 с.

GOST R ISO 9004-2019. Menedzhment kachestva. Kachestvo organizatsii. Rukovodstvo po dostizheniyu ustoychivogo uspekha organizatsii [Quality management. Quality of an organization. Guidance to achieve sustained success]. Moscow, 2019. 56 p. (In Russ.).

(9). ГОСТ Р ИСО 17666-2021. Менеджмент риска. Космические системы. Введ. 2022–03–01. Москва: Российский институт стандартизации, 2021. 20 с.

GOST R ISO 17666-2021. Menedzhment riska. Kosmicheskiye sistemy [Risk management – Space systems]. Moscow, 2021. 20 p. (In Russ.).

(10). ГОСТ Р 52806-2007. Менеджмент рисков проектов. Общие положения. Введ. 2010–01–01. Москва: Стандартинформ, 2020. 20 с.

GOST R 52806-2007. Menedzhment riskov proyektov. Obshchiye polozheniya [Project risk management. General]. Moscow, 2020. 20 p. (In Russ.).

(11). Brazhnikova K. Improving the quality of modeling thermodynamic processes // Journal of physics: Conference Series. 2022. Vol. 2182. 012044. DOI: 10.1088/1742-6596/2182/1/012044. EDN: CDBZCL.

Published

2025-09-22

How to Cite

[1]
Brazhnikova К.А. and Savich Е.К. 2025. Assessment of the quality of the research process at the stage of scientific studies. Omsk Scientific Bulletin. 3(195) (Sep. 2025), 27–33. DOI:https://doi.org/10.25206/1813-8225-2025-195-27-33.

Issue

Section

Mechanical Engineering

Most read articles by the same author(s)