Current-to-frequency converter based on oscillistor effect

Authors

DOI:

https://doi.org/10.25206/1813-8225-2024-192-134-138

Keywords:

converter, oscillistor, current fluctuations, frequency, electric field, voltage. electron-hole plasma, transducer, oscillisator, current oscillations, frequency, electric field, field strengthintensity.

Abstract

The possibility of direct current measuring converters construction measuring converted direct current, realizing straightdirect current-to-frequency conversion  of current into frequency of alternating current or voltage is considered. An oscillistor made of electronic germanium is used as an element realizing this conversion. The dependences of frequency on current obtained in the course of theoretical and experimental studies are given. The device of the current-frequency converter is shown and its characteristics are given.

Downloads

Download data is not yet available.

Author Biographies

Cheredov Aleksandr Ivanovich, Omsk State Technical University

Candidate of Technical Sciences, Associate Professor, Associate Professor of Radio Engineering Devices and Diagnostic Systems Department, Omsk State Technical University (OmSTU), Omsk.

Andrey Vladimirovich, Omsk State Technical University

Senior Lecturer of Radio Engineering Devices and Diagnostic Systems Department, OmSTU, Omsk.

Downloads


Abstract views: 6

Published

2024-11-29

How to Cite

[1]
Cheredov А.И. and Shchelkanov А.В. 2024. Current-to-frequency converter based on oscillistor effect. Omsk Scientific Bulletin. 4(192) (Nov. 2024), 134–138. DOI:https://doi.org/10.25206/1813-8225-2024-192-134-138.

Issue

No. 4(192) (2024)

Section

Electronics, Photonics, Instrument Engineering and Connection

License

Non-exclusive rights to the article are transferred to the journal in full accordance with the Creative Commons License BY-NC-SA 4.0 «Attribution-NonCommercial-ShareAlike 4.0 Worldwide License (CC BY-NC-SA 4.0»)

by-nc-sa