Evaluation of the influence of laser quenching mode parameters on the quality of the surface and surface layer of machine parts (overview)

Authors

  • Petrochenko Sergei Valeryevich Omsk State Transport University, Omsk, Russia https://orcid.org/0000-0001-5600-835X
  • Hao Qingle Ningbo Intelligent Machine Tool Research Institute Co., Ltd. of China National Machinery Institute Group, Ningbo, People's Republic of China
  • Xinshan Yu Ningbo Intelligent Machine Tool Research Institute Co., Ltd. of China National Machinery Institute Group, Ningbo, People's Republic of China https://orcid.org/0009-0003-4899-1018
  • Zhao Kaipeng Ningbo Intelligent Machine Tool Research Institute Co., Ltd. of China National Machinery Institute Group, Ningbo, People's Republic of China https://orcid.org/0009-0005-2149-9159

DOI:

https://doi.org/10.25206/1813-8225-2024-189-56-65

Keywords:

laser hardening, radiation power, laser exposure zone, roughness, hardness, residual stresses, wear resistance

Abstract

This review provides an assessment of the influence of the parameters of the laser hardening mode on the quality of the surface and the surface layer. It is presented how the processing speed, radiation power, surface heating temperature, initial structure during, the number of passes laser hardening affect the geometric parameters of the laser exposure zone, roughness, hardness and wear resistance of the surface, deformation, magnitude and sign of residual stresses in the surface layer. The conclusion is made in the form of recommendations on the selection of parameters of the laser hardening mode to obtain a given surface quality and surface layer of machine parts.

Downloads

Download data is not yet available.

Author Biographies

Petrochenko Sergei Valeryevich, Omsk State Transport University, Omsk, Russia

кандидат технических наук, доцент (Россия), доцент кафедры «Технологии транспортного машиностроения и ремонта подвижного состава» Омского государственного университета путей сообщения, г. Омск; старший инженер-исследователь Научно-исследовательского института интеллектуального станкостроения города Нинбо, ООО «Китайская национальная группа машиностроительных институтов», г. Нинбо, Китайская Народная Республика.

Hao Qingle, Ningbo Intelligent Machine Tool Research Institute Co., Ltd. of China National Machinery Institute Group, Ningbo, People's Republic of China

Doctor of Philosophy Sciences, Deputy Director of Institute of Advanced Manufacturing Ningbo Intelligent Machine Tool Research Institute Co., Ltd. of China National Machinery Institute Group, Ningbo, People's Republic of China.

Xinshan Yu, Ningbo Intelligent Machine Tool Research Institute Co., Ltd. of China National Machinery Institute Group, Ningbo, People's Republic of China

Research Engineer of Institute of Advanced Manufacturing Ningbo Intelligent Machine Tool Research Institute Co., Ltd. of China National Machinery Institute Group, Ningbo, People's Republic of China.

Zhao Kaipeng, Ningbo Intelligent Machine Tool Research Institute Co., Ltd. of China National Machinery Institute Group, Ningbo, People's Republic of China

Research Engineer of Institute of Advanced Manufacturing Ningbo Intelligent Machine Tool Research Institute Co., Ltd. of China National Machinery Institute Group, Ningbo, People's Republic of China.

Downloads


Abstract views: 25

Published

2024-02-26

How to Cite

[1]
Petrochenko С.В., Hao Ц., Yu С. and Zhao К. 2024. Evaluation of the influence of laser quenching mode parameters on the quality of the surface and surface layer of machine parts (overview). Omsk Scientific Bulletin. 1(189) (Feb. 2024), 56–65. DOI:https://doi.org/10.25206/1813-8225-2024-189-56-65.

Issue

No. 1(189) (2024)

Section

Mechanical Engineering

License

Non-exclusive rights to the article are transferred to the journal in full accordance with the Creative Commons License BY-NC-SA 4.0 «Attribution-NonCommercial-ShareAlike 4.0 Worldwide License (CC BY-NC-SA 4.0»)

by-nc-sa