Optimization of parameters of the reference frequency source with a composite resonator-thermostat

Authors

DOI:

https://doi.org/10.25206/1813-8225-2022-184-91-95

Keywords:

oven controlled crystal oscillator, lowtemperature co-fired ceramics, quartz resonator-thermostat, thermoregulatory, thermal model of the design, temperature setting process

Abstract

A promising design of a thermostated quartz oscillator with a resonator-thermostat is considered. In order to study the
effect of replacing the material of the microplate in the resonator-thermostat on the operation of the generator, the
processes of establishing a stationary temperature regime after switching on are investigated. The material of the new microplate corresponds to the technology of lowtemperature co-fired ceramics. An unacceptable change in the nature of the establishment of a stationary regime has been detected. To solve the problem found, the design change is proposed.

Downloads

Download data is not yet available.

Author Biographies

Игорь Витальевич Хоменко, Omsk State Technical University, Omsk, Russia

кандидат технических наук, доцент кафедры «Радиотехнические устройства и системы диагностики» Омского государственного технического университета (ОмГТУ), г. Омск.

Анатолий Владимирович Косых, Omsk State Technical University, Omsk, Russia

доктор технических наук, профессор (Россия), заведующий кафедрой «Радиотехнические устройства и системы диагностики» ОмГТУ, г. Омск.

Екатерина Юрьевна Компанец, Omsk State Technical University, Omsk, Russia

студентка группы РТм-221 радиотехнического факультета ОмГТУ, г. Омск.

Downloads


Abstract views: 38

Published

2022-11-30

How to Cite

[1]
Хоменко, И.В., Косых, А.В. and Компанец, Е.Ю. 2022. Optimization of parameters of the reference frequency source with a composite resonator-thermostat. Omsk Scientific Bulletin. 4(184) (Nov. 2022), 91–95. DOI:https://doi.org/10.25206/1813-8225-2022-184-91-95.

Issue

No. 4(184) (2022)

Section

Electronics, Photonics, Instrument Engineering and Connection

License

Non-exclusive rights to the article are transferred to the journal in full accordance with the Creative Commons License BY-NC-SA 4.0 «Attribution-NonCommercial-ShareAlike 4.0 Worldwide License (CC BY-NC-SA 4.0»)

by-nc-sa