Development of stand for visualization and experimental study of working process in vortex jet device

Authors

  • Aleksandr Yurievich Uss Bauman Moscow State Technical University, Russia, Moscow
  • Alexander Sergeevich Pugachuk Bauman Moscow State Technical University, Russia, Moscow
  • Andrey Vladimirovich Chernyshev Bauman Moscow State Technical University, Russia, Moscow https://orcid.org/0000-0003-4902-8314
  • Farit Garifovich Tukhbatullin National University of Oil and Gas «Gubkin University», Russia, Moscow

DOI:

https://doi.org/10.25206/2588-0373-2020-4-3-45-55

Keywords:

vortex amplifier, optimization, swirl chamber, gas flow regulation, fluidics

Abstract

The work is devoted to the development of a stand for physical modeling of the workflow and visualization of gas flow
in the flow cavity of a vortex jet device. Based on the literature review, a number of examples are found for visualizing
the workflow in the flow cavity of a vortex jet device. The developed stand allows performing physical modeling of working
processes in the flow cavity of a vortex jet device using its incomplete layout. Using similarity criteria, the developer can get
the necessary workflow parameters in a real research object. The developed stand also allows us to study the distribution
of gas flows in the flow cavity of a vortex jet device. The study of the gas flow process in various models of vortex jet devices
using the developed stand will allow the developer to make a conclusion about the influence of geometric design parameters
on the aerodynamics of the vortex chamber, as well as to study the flow of gas in the flow cavity. The stand is recommended
to be used as a tool in the design methodology of vortex jet devices based on multi-criteria optimization of geometric
parameters of the flow cavity based on the zero-order method (simplex method).

Downloads

Download data is not yet available.

Author Biographies

Aleksandr Yurievich Uss, Bauman Moscow State Technical University, Russia, Moscow

Graduate Student of Vacuum and Compressor Equipment Department, Bauman Moscow State Technical University (BMSTU).

Alexander Sergeevich Pugachuk, Bauman Moscow State Technical University, Russia, Moscow

Candidate of Technical Sciences, Associate Professor of Vacuum and Compressor Equipment Department, BMSTU; Senior Researcher of Laboratory No. 10.1 — Gas Turbine Technologies, Joint Institute for High Temperatures of the RAS.

Andrey Vladimirovich Chernyshev, Bauman Moscow State Technical University, Russia, Moscow

Doctor of Technical Sciences, Professor, Chief of Vacuum and Compressor Equipment Department, BMSTU.

Farit Garifovich Tukhbatullin, National University of Oil and Gas «Gubkin University», Russia, Moscow

Doctor of Technical Sciences, Professor of Oil Products and Gas Supplies Department, National University of Oil and Gas «Gubkin University».

Downloads


Abstract views: 34

Published

2020-10-20

How to Cite

Uss А. Ю., Pugachuk А. С., Chernyshev А. В., & Tukhbatullin Ф. Г. (2020). Development of stand for visualization and experimental study of working process in vortex jet device. Omsk Scientific Bulletin. Series «Aviation-Rocket and Power Engineering», 4(3), 45–55. https://doi.org/10.25206/2588-0373-2020-4-3-45-55

Issue

Vol. 4 No. 3 (2020)

Section

Power and chemical engineering

License

Non-exclusive rights to the article are transferred to the journal in full accordance with the Creative Commons License BY-NC-SA 4.0 «Attribution-NonCommercial-ShareAlike 4.0 Worldwide License (CC BY-NC-SA 4.0»)

Creative Commons License