Automation of technological process of filling chambers during pneumatic vacuum tests

Authors

  • Andrey Rafailovich Aliev Khrunichev State Research and Production Space Center, JSС, Russia, 121309, Moscow, Novozavodskaya St., 18

DOI:

https://doi.org/10.25206/2588-0373-2021-5-4-24-32

Keywords:

tightness test, pneumatic vacuum tests, filling the chamber with gas, automatic filling mode, automation of the technological process

Abstract

The scheme and technology of the automated process of filling chambers with control gas are considered. Mathematical description of the functioning of filling system served as a basis for the development of design and analysis procedure of performance characteristics is constructed.

Downloads

Download data is not yet available.

Author Biography

Andrey Rafailovich Aliev, Khrunichev State Research and Production Space Center, JSС, Russia, 121309, Moscow, Novozavodskaya St., 18

Design Engineer 1st Сategories of Armatura Design Bureau

Downloads


Abstract views: 28

Published

2021-12-17

How to Cite

Aliev А. Р. (2021). Automation of technological process of filling chambers during pneumatic vacuum tests. Omsk Scientific Bulletin. Series «Aviation-Rocket and Power Engineering», 5(4), 24–32. https://doi.org/10.25206/2588-0373-2021-5-4-24-32

Issue

Vol. 5 No. 4 (2021)

Section

Power and chemical engineering

License

Non-exclusive rights to the article are transferred to the journal in full accordance with the Creative Commons License BY-NC-SA 4.0 «Attribution-NonCommercial-ShareAlike 4.0 Worldwide License (CC BY-NC-SA 4.0»)

Creative Commons License