Experimental research on the technology of manufacturing and burning of aircraft structures made of multicomponent materials

Authors

  • Valeriy Ivanovich Trushlyakov Omsk State Technical University, Omsk, Russia
  • Denis Yurievich Davydovich Omsk State Technical University, Omsk, Russia

DOI:

https://doi.org/10.25206/2588-0373-2020-4-1-50-59

Keywords:

combustion, plastics, energy materials, separated parts of aircraft and spacecraft

Abstract

The analysis of the state of modern technologies for utilization of reinforced polymers is carried out. The task of the study was formulated. Based on thermodynamic analysis and consideration of various combinations of compositions for conducting experiments, six types of test multicomponent samples were selected for conducting experimental studies on their combustion. To determine the maximum combustion temperature, the ignition temperature of the samples, and the mass of combustion residues. The analysis of the results obtained was carried out, and the compositions of the components for further research were identified.

Downloads

Download data is not yet available.

Author Biographies

Valeriy Ivanovich Trushlyakov, Omsk State Technical University, Omsk, Russia

Doctor of Technical Sciences, Professor of Aviation and Rocketry Department.

Denis Yurievich Davydovich, Omsk State Technical University, Omsk, Russia

Graduate Student, Aviation and Rocketry Department.

Downloads


Abstract views: 33

Published

2020-03-27

How to Cite

Trushlyakov В. И., & Davydovich Д. Ю. (2020). Experimental research on the technology of manufacturing and burning of aircraft structures made of multicomponent materials. Omsk Scientific Bulletin. Series «Aviation-Rocket and Power Engineering», 4(1), 50–59. https://doi.org/10.25206/2588-0373-2020-4-1-50-59

Issue

Vol. 4 No. 1 (2020)

Section

Aviation and rocket-space engineering

License

Non-exclusive rights to the article are transferred to the journal in full accordance with the Creative Commons License BY-NC-SA 4.0 «Attribution-NonCommercial-ShareAlike 4.0 Worldwide License (CC BY-NC-SA 4.0»)

Creative Commons License