Analysis of mechanical losses in the working chamber of rotary vane machines

Authors

  • Nikolay Anatolievich Raikovsky Omsk State Technical University, Omsk, Russia
  • Vladimir Leonidovich Yusha Omsk State Technical University, Omsk, Russia https://orcid.org/0000-0001-9858-7687
  • Konstantin Igorevich Kuznetsov Omsk State Technical University, Omsk, Russia
  • Vladislav Andreyevich Korenev Omsk State Technical University, Omsk, Russia
  • Vladimir Sergeyevich Karpus Omsk State Technical University, Omsk, Russia

DOI:

https://doi.org/10.25206/2588-0373-2020-4-1-23-32

Keywords:

rotary vane compressor, mechanical friction, lubrication, non-lubricated working chamber, power

Abstract

The work is devoted to the analysis of reducing friction losses in rotary vane machines. It is established that the smallest friction loss is provided by lubricating the cylinder with water, while the values of the friction coefficient obtained by processing the results indicate the presence of the hydrodynamic lubrication regime. Unexpectedly large values of friction power losses are obtained when oil is used as a lubricant, which is primarily due to high hydromechanical losses, which, according to preliminary estimates, can reach 70 %. The analysis of the ratio «friction power/indicator power» in rotary vane compressor machines shows that the use of the water as a lubricant can significantly increase the speed of machines without a significant decrease in their energy characteristics. Increasing the speed of non-lubricated plate machines requires the search for new technical solutions and materials of friction units forming the working chamber.

Downloads

Download data is not yet available.

Author Biographies

Nikolay Anatolievich Raikovsky, Omsk State Technical University, Omsk, Russia

Candidate of Technical Sciences, Associate Professor of Refrigeration and Compressor Engineering and Technology Department.

Vladimir Leonidovich Yusha, Omsk State Technical University, Omsk, Russia

Doctor of Technical Sciences, Professor, Head of Refrigeration and Compressor Engineering and Technology Department, Dean of Petrochemical Department.

Konstantin Igorevich Kuznetsov, Omsk State Technical University, Omsk, Russia

Student gr. Kh-161, Petrochemical Department.

Vladislav Andreyevich Korenev, Omsk State Technical University, Omsk, Russia

Student gr. Kh-161, Petrochemical Department.

Vladimir Sergeyevich Karpus, Omsk State Technical University, Omsk, Russia

Student gr. TMO-171, Petrochemical Department.

Downloads


Abstract views: 48

Published

2020-03-27

How to Cite

Raikovsky Н. А., Yusha В. Л., Kuznetsov К. И., Korenev В. А., & Karpus В. С. (2020). Analysis of mechanical losses in the working chamber of rotary vane machines. Omsk Scientific Bulletin. Series «Aviation-Rocket and Power Engineering», 4(1), 23–32. https://doi.org/10.25206/2588-0373-2020-4-1-23-32

Issue

Vol. 4 No. 1 (2020)

Section

Power and chemical engineering

License

Non-exclusive rights to the article are transferred to the journal in full accordance with the Creative Commons License BY-NC-SA 4.0 «Attribution-NonCommercial-ShareAlike 4.0 Worldwide License (CC BY-NC-SA 4.0»)

Creative Commons License