Applying «compressor-network» analysis method for the system with reciprocating compressor and recirculating line

Authors

  • Aleksandr Dmitriyevich Vanyashov Omsk State Technical University, Omsk, Russia
  • Anton Vladimirovich Krupnikov OJSC «Sibneftetransproekt», Russia, Omsk

DOI:

https://doi.org/10.25206/2588-0373-2020-4-2-56-63

Keywords:

reciprocating compressor, underground gas storage, control valve, recirculating line

Abstract

The subject of research is an opposed reciprocating compressor (RC) providing gas injection into the underground gas storage.
Issues concerning implementation of compressor start-up conditions to recirculating line have been considered. As a tool,
the compressor-network analysis method is used, which consists in determining the system operating points through matching
characteristics of the reciprocating compressor and the network, for which in this case the recirculating line with the control valve is considered. Recommendations have been received to sel ect a control valve type for the reciprocating compressor operating in both single-stage and two-stage modes.

Downloads

Download data is not yet available.

Author Biographies

Aleksandr Dmitriyevich Vanyashov, Omsk State Technical University, Omsk, Russia

Candidate of Technical Sciences, Associate Professor of Refrigeration and Compressor Engineering and
Technology Department, Omsk State Technical University; Head of Compressor Station Design Department, OJSC «Sibneftetransproyekt».

Anton Vladimirovich Krupnikov, OJSC «Sibneftetransproekt», Russia, Omsk

Chief Engineer, OJSC «Sibneftetransproyekt».

Downloads


Abstract views: 44

Published

2020-06-17

How to Cite

Vanyashov А. Д., & Krupnikov А. В. (2020). Applying «compressor-network» analysis method for the system with reciprocating compressor and recirculating line. Omsk Scientific Bulletin. Series «Aviation-Rocket and Power Engineering», 4(2), 56–63. https://doi.org/10.25206/2588-0373-2020-4-2-56-63

Issue

Section

Power and chemical engineering