Method for calculating actual capacity of single-stage long-stroke reciprocating compressors

Authors

DOI:

https://doi.org/10.25206/2588-0373-2020-4-4-9-15

Keywords:

reciprocating compressor, low-speed long-stroke stage, delivery ratio, heating ratio, density ratio, experiment, temperature diagram

Abstract

The article presents a generalized method for calculating the actual performance of low-speed longstroke air compressor stages of compression, based on determining the flow rate as a set of coefficients reflecting the influence of various factors on productivity losses. The method takes into account the design and operating features of low-speed long-stroke air compressor stages of compression and differs significantly from a similar method used to calculate high-speed stages of reciprocating compressors.

Downloads

Download data is not yet available.

Author Biographies

Vladimir Leonidovich Yusha, Omsk State Technical University, Omsk, Russia

Doctor of Technical Sciences, Professor, Head of Refrigeration and Compressor Engineering and Technology Department, Dean of Petrochemical Department.

Sergey Sergeyevich Busarov, Omsk State Technical University, Omsk, Russia

Candidate of Technical Sciences, Associate Professor of Refrigeration and Compressor Engineering and Technology Department.

Downloads


Abstract views: 11

Published

2020-12-21

How to Cite

Yusha В. Л., & Busarov С. С. (2020). Method for calculating actual capacity of single-stage long-stroke reciprocating compressors. Omsk Scientific Bulletin. Series «Aviation-Rocket and Power Engineering», 4(4), 9–15. https://doi.org/10.25206/2588-0373-2020-4-4-9-15

Issue

Vol. 4 No. 4 (2020)

Section

Power and chemical engineering

License

Non-exclusive rights to the article are transferred to the journal in full accordance with the Creative Commons License BY-NC-SA 4.0 «Attribution-NonCommercial-ShareAlike 4.0 Worldwide License (CC BY-NC-SA 4.0»)

Creative Commons License