Study of operation of spool hydraulic control unit that transmits reduced pressure signal to control hydraulic distributors, control cylinders, parameters of axial piston pumps and hydraulic motors
DOI:
https://doi.org/10.25206/2588-0373-2022-6-1-64-74Keywords:
hydraulic control unit, spool valves, pressure reduction, flow-rate characteristicsAbstract
The article discusses the test results of three modernized hydraulic control units. In the course of the experiments, the
nodes are refined with subsequent refinement tests. As a result, of the research, the following results are obtained
a characteristic of the dependence of the differential pressure on the flow rate, a dependence of the reduction pressure
on the angle of the handle, pressure drops in the working bends of the control unit, etc. The analysis of the results and
comparison with theoretical calculation shows that there are three main types of adjustment characteristics: parallel
theoretical —with laminar flow, three — zone and quadratic — with turbulent mode.
Downloads
Published
How to Cite
Issue
Section
License
Non-exclusive rights to the article are transferred to the journal in full accordance with the Creative Commons License BY-NC-SA 4.0 «Attribution-NonCommercial-ShareAlike 4.0 Worldwide License (CC BY-NC-SA 4.0»)