Determination of static and dynamic forces for manufacture of corrugated belts for wind tunnel heat exchangers

Authors

  • Yulia Vladimirovna Shchipkova Omsk State Technical University, Omsk, Russia

DOI:

https://doi.org/10.25206/2588-0373-2021-5-3-91-98

Keywords:

static force, dynamic force, corrugated tape, wind tunnels, rolling, vibration installation

Abstract

The article presents the results of an experimental study aimed at determining the required load when rolling a corrugated heat exchanger belt for wind tunnels. The experiments are carried out on a horizontal milling machine model 6H81. The results of the experiment are applied to stainless steel tapes with a thickness of 0,3 to 0,4 mm.

Downloads

Download data is not yet available.

Author Biography

Yulia Vladimirovna Shchipkova, Omsk State Technical University, Omsk, Russia

Graduate Student, Metal-сutting Machines and Tools Department; Senior Lecturer of Oil and Gas Engineering, Standartization and Metrology Department.

Downloads


Abstract views: 9

Published

2021-10-21

How to Cite

Shchipkova Ю. В. (2021). Determination of static and dynamic forces for manufacture of corrugated belts for wind tunnel heat exchangers. Omsk Scientific Bulletin. Series «Aviation-Rocket and Power Engineering», 5(3), 91–98. https://doi.org/10.25206/2588-0373-2021-5-3-91-98

Issue

Vol. 5 No. 3 (2021)

Section

Aviation and rocket-space engineering

License

Non-exclusive rights to the article are transferred to the journal in full accordance with the Creative Commons License BY-NC-SA 4.0 «Attribution-NonCommercial-ShareAlike 4.0 Worldwide License (CC BY-NC-SA 4.0»)

Creative Commons License