Modernization of the load gripping device for forestry industry

Authors

DOI:

https://doi.org/10.25206/2588-0373-2023-7-3-53-61

Keywords:

load-gripping equipment, friction-clamping load-gripping device, reverse engineering

Abstract

The article proposes to install toothed plates on the contact surfaces of a foreign-made friction-clamping load-gripping device. The modernization of the friction-clamping load-gripping device is designed to use the device when moving goods from wood. The need for modernization is substantiated. The parameters of the gear plate are determined. The reliability of the upgraded friction-clamping load-gripping device was estimated. The article will be useful to engineers and researchers working on reverse engineering of foreign-made industrial equipment.

Downloads

Download data is not yet available.

Author Biographies

Korolevskikh Anastasia Nikolaevna, Industrial University of Tyumen, Tyumen, Russia

Senior Lecturer of Applied Mechanics Department, Industrial University of Tyumen (IUT), Tyumen.

Dvinskaya Olga Askhatovna, Industrial University of Tyumen, Tyumen, Russia

Assistant of Applied Mechanics Department, IUT, Tyumen.

Bogdanova Elena Alexandrovna, Industrial University of Tyumen, Tyumen, Russia

Assistant of Applied Mechanics Department, IUT, Tyumen.

Downloads


Abstract views: 35

Published

2023-10-27

How to Cite

Korolevskikh А. Н., Dvinskaya О. А., & Bogdanova Е. А. (2023). Modernization of the load gripping device for forestry industry. Omsk Scientific Bulletin. Series «Aviation-Rocket and Power Engineering», 7(3), 53–61. https://doi.org/10.25206/2588-0373-2023-7-3-53-61

Issue

Vol. 7 No. 3 (2023)

Section

Power and chemical engineering

License

Non-exclusive rights to the article are transferred to the journal in full accordance with the Creative Commons License BY-NC-SA 4.0 «Attribution-NonCommercial-ShareAlike 4.0 Worldwide License (CC BY-NC-SA 4.0»)

Creative Commons License